DEZOCURE 550&650
WATER-BASED CURING COMPOUND
DESCRIPTION
DEZOCURE 550&650 is a water-based curing compound which when applied to new concrete substrates after the final finishing operations are completed to form a film that retains mix water allowing normal hydration.
This film remains as a protective surface sealing treatment that greatly reduces dusting and increases stain resistance of the cured concrete.
DEZOCURE 550&650 meets the requirements of the following standards: ASTM C309, ASTM C156
BS 7542
ADVANTAGES
- Reduces early evaporation;
- Aids concrete to attain maximum hydration, strength, durability and surface hardness;
- Shrinkage with associated hairline cracking and crazing greatly reduced in vertical and horizontal applications;
- Reduces permeability;
- Excellent moisture retention produces a durable concrete surface through optimum curing;
- Increases stain resistance and cleanability by sealing the surface pores;
- Extremely economical and easily applied;
APPLICATION
- For application on vertical, horizontal, smooth or textured, concrete substrates;
- Concreting in windy areas;
- Concreting in areas where concrete is exposed to intense sunlight;
- Suitable for curing and sealing plain concrete and concrete surfaces treated with non-metallic, dry shake floor hardeners and topping courses;
- Suitable for interior or exterior concrete floors, pavements, sidewalks and structures;
- Applications where solvent-based products cannot be used because of health and safety reasons;
- Applications to existing concrete surfaces as economical, water clear, protective sealing treatments;
APPLICATION INSTRUCTIONS
1- Application should be made immediately following the final finishing operations as soon as the surface “sheen” of moisture has disappeared and slab can support the weight of an applicator. In case of delay, thoroughly dampen the surface with clean water then applying DEZOCURE 550&650;
2- Ensure that there is no free water on the surface before applying;
3- In case of hot weather and Mat concreting, the required thickness is achieved by applying 2 layers. Leave the first layer for 30-60 minutes before applying the second layer;
4- DEZOCURE 550&650 could be mixed with clean water
(mixing ratio: DEZOCURE 550&650:Water = 1:0.3-0.5 / wt) in temperate weathers;
5- Apply by spray, brush, long nap roller, or lamb's wool applicator. For best results, we recommend a low-pressure garden-type sprayer with neoprene hoses. Apply uniformly to form a continuous film.
6- Apply DEZOCURE 550&650 at a rate of 150-200 grams per 1.0 m2; 7- Avoid any ponding on the concrete surface;
Note:
-Prior to drying; equipment can be cleaned with soap and water; -After applying, Protects surfaces from freezing;
PHYSICAL AND CHEMICAL PROPERTIES
Physical state: Liquid Specific gravity: 1.4±0.1 g/cm3 Color: Light gray (Silver)
pH: 12.0±1.0 Chloride content: Nil
PACKAGING
30 kg containers
STORAGE
Shelf life: 1 year in the original package
Storage condition: should be protected from direct sunlight and frost. Keep container in the temperature range between +10°C and +30°C
HEALTH AND SAFETY
This product does not contain any hazardous substance to human health and the environment. However, it should not be swallowed and contacted with skin and eyes. Rubber gloves, boots and goggles should be used during application. Accidental splashes on the skin should be washed with soap and water and any contaminated clothing removed. Contact with eyes should be avoided and if any accidental contamination does occur they should be washed with copious amounts of water and medical attention sought.
DEZOCURE 550&650 is not flammable.
For further information refer to the material safety data sheet. MSDS is available at CLINICBETON website.
TECHNICAL SERVICE
The CLINICBETON INTERNATIONAL GROUP Technical Department is available to assist you in the correct use of our products and its resources are at your disposal entirely without obligation.