Concrete Dissolver
Description:
Concrete solvent (concrete surface cleaner) is a new product that is completely safe for humans and the environment and very easy to use for the user.
Concrete solvent is an acid substitute that is free of vapors and unpleasant odors. The concrete solvent dissolves (breaks the intermolecular bond) the ionic bond inside the cement and removes the cement or concrete from any surface. The ion exchange used in this product has been used for the first time in the industry.
The concrete solvent does not contain muriatic, hydrochloric, sulfuric or phosphoric acids.
Applications:
• Cleaning the track mixer surfaces from concrete.
• Separation of concrete from the surface of the concrete mold.
• Washing tools that have concrete stuck to them.
• Cleaning concrete from all tile and ceramic surfaces, etc.
Implementation steps:
Always a concrete solvent. Apply on a dry and cool surface. The best result is achieved by spraying this product with an airless spray. But spraying with normal pumps or even applying with a brush is also possible.
Before applying the concrete solvent. Make sure that the surface is cool. (Note: Never apply concrete solvent on a heated surface in the vicinity of sunlight), the best time to apply is early morning or afternoon (sunset). Select a section for work and consider the area as a starting point and continue spraying evenly until the end of the section. After completely covering the surface with concrete solvent, allow this product to penetrate the surface for 10 to 45 minutes. This time depends on the ambient temperature and the thickness of the structure. When on the surface, white powder, sugar was formed, again on the surface of concrete solvent. spray it until the surface is completely saturated, after turning the cement or concrete into a cheesy product, wash it with water, the best result is obtained by washing with high pressure (300-500 Psi), the output pressure from the urban plumbing is also responsible. .
To clean small items, soak them in a bucket containing concrete solvent for 20-45 minutes. Immerse, then wash with cold water. Test on magnesium first.
When the air temperature is below the freezing point or very hot, do not perform it. The best result is obtained at a temperature of 5 degrees Celsius to 27 degrees Celsius.
Before using on a large scale, test on a small spot to measure the cleaning power (number of times needed).
Safety:
• Always use protective glasses when using or transporting.
• Never use concrete solvent on hot surfaces. do not run
• No concrete solvent. Do not dilute.
• Before applying concrete solvent. Avoid wetting the concrete.
Packing:
Concrete solvent solution is supplied in 20 gallons, 220 barrels and 1100 kg tanks.
Storage:
It is recommended to store at a temperature of 5 to 40 degrees Celsius away from direct sunlight. If it is frozen, raise the temperature of the ingredients to melt and then mix with a mixer.
Shelf life:
It can be stored for up to 12 months if kept in the recommended conditions and in the original packaging.
Safety:
Avoid contact with skin, eyes and taste the product.
Technical services:
The technical department of Rayehe Beton Sabz Company (technical and specialized concrete clinic of Iran) will respond to you in order to provide technical advice.