DEZOGARD E-350
Intermediate polyamide epoxy paint
This two-component product, which is obtained from the combination of epoxy resin and polyamide hardener, forms a hard layer on metal surfaces after drying. This coating dries due to chemical reactions and is used as a protective coating in metal structures, industrial tanks and bridges. It can also be used in cases where high resistance to moisture and mechanical factors is considered. This coating is used with a higher percentage of resin to protect the lining layer.
Technical Information:
Gray shade (can be provided in other shades as well)
Mixing ratio = 15/100A/B
Epoxy thinner
Density 1.45 ± 0.1 gr/
Solid weighing 67 ± 2 percent
Volume solid 45 ± 3 percent
cover 9
Surface drying time is less than 6 hours, deep drying time is 24 hours, final drying time is 7 days
Thickness 50 microns
Method of Use:
Due to the importance of the mixing ratio of the components and its effect on the quality of the product, we mix the two components A and B together for 5 minutes with a suitable stirrer until it becomes uniform. After waiting for an hour, it is ready to use.
Surface conditions:
In order to achieve adhesion, the lining should be used and the desired surface should be completely clean, dry and free of oil, dust, salts and other external factors.
Storage time:
One year under standard conditions.
Safety tips:
It is recommended to avoid continuous inhalation of this paint in closed spaces and use appropriate safety equipment as much as possible and wash with plenty of water in case of contact with skin and eyes.
Technical approval:
All the products offered by Iran Technical and Specialized Concrete Clinic are in accordance with international quality standards.