DEZOTOP 900
Premixed dry shake surface floor hardener
Based on the information provided in the search results, the key points about Dezotop 900 are:
Dezotop 900 is a ready-to-use product composed of artificial mineral aggregates and cement, applied as a dry spray on fresh concrete surfaces. Dezotop 900 provides continuous protection against repeated use, impact, and abrasion, creating a durable surface resistant to industrial chemicals, oils, industrial grease, cleaning agents, and hydraulic fluids.
Primary uses:
Dezotop 900 is designed to optimize durability in areas with medium to heavy concrete floor traffic and where dust resistance is essential. Its primary applications include:
- Workshops
- Power plants
- Garages
- Parking lots
- Warehouses
- Loading areas
- Factories
- Shipbuilding workshops
- Aircraft hangars
- Multi-story parking lots
- Car washes
- Helicopter landing areas
Ingredients:
Dezotop 900 is composed of high-quality non-metallic artificial aggregates, proprietary chemicals, pigments, and cement. Its key advantages include:
- Pre-mixed quality assurance
- Seamless application on fresh concrete
- Quick and easy installation
- Better protection against leaks by applying more material at the end of the piece
- Higher resistance to abrasion, wear, and impact compared to regular concrete
- Non-oxidizing, non-slip final surface
- High impermeability compared to concrete under equivalent conditions
- Integration into the concrete structure without delaminating or separating
It does not oxidize.
The final surface is non-slip.
It has high impermeability compared to concrete under the same conditions.
Dezotop 900 becomes an integral part of the concrete structure and therefore does not peel or separate.
It does not collect dust.
It is suitable for both indoor and outdoor use.
It is easy to clean.
It is cost-effective.
It does not require any special preparation or application
Packaging:
Dezotop 900 is available in 25 kg bags.
Chemical Resistance:
When properly cured, Dezotop 900 resists machine oils, mineral oils, weak acids, 10% salt water solutions, and alkaline solutions up to 25%.
Abrasion Resistance:
According to ASTM C1353 testing, when Dezotop 900 is applied at a rate of 5 kg/m2, it exhibits approximately 240% greater abrasion resistance compared to a control concrete.
According to the information provided:
- Following ACI 302-1 R-89 and ACI 201-2R-77, the existence of a properly designed concrete mix is mandatory.
The concrete producer must ensure that the following requirements are met:
- Cement (SRC or OPC): Minimum 320 kg/m3
- Water-cement ratio: Maximum 0.5, Minimum 0.4
- Slump: Desired 75 mm
- Strength: Minimum 31 MPa
The concrete should not have segregation, bleeding, or more than 3% air content. When applying Dezotop 900 on concrete with microsilica, care must be taken regarding the application time. For better workability, the use of water-reducing admixtures like Dezoplase or Dezocrete in the concrete is recommended. The concrete layers on which Dezotop 900 is to be applied must have a minimum thickness of 75 mm. After concrete placement, the surface should be leveled using a screed and then vibrated.
The key steps for applying Dezotop 900 are:
1. Spread two-thirds of the required material evenly over the moist concrete surface using a long-handled tool.
2. Allow the applied material to absorb moisture from the surface, which will result in a uniform dark color.
3. Use a wooden trowel to spread the Dezotop 900 material across the surface, ensuring it integrates with the initial concrete surface.
4. Apply the remaining material, and once the color darkens, use the wooden trowel to spread it evenly across the surface.
5. When the surface has hardened enough to support the weight of a person with only a slight indentation, use a power trowel to complete the Dezotop 900 application, resulting in a smooth and non-slip surface. Avoid over-working the surface.
6. If final smoothing is done using hand tools like a metal trowel, this should be done before the concrete hardens to the point of being able to withstand foot traffic.
Storage:
Store this product in a covered area, away from direct sunlight, rain, and on pallets. Avoid excessive pressure. The product has a shelf life of approximately 12 months. Failure to adhere to proper storage methods can result in damage to the product or its packaging.
Safety Precautions:
This product contains cementitious materials that can cause irritation. Avoid contact with eyes and prolonged contact with the skin. In case of contamination, wash with water and inform a doctor. Keep out of reach of children.
Quality Assurance:
All products supplied by the Iranian Technical and Specialized Concrete Clinic comply with international quality standards.
DEZOTOP 900
Premixed dry shake surface floor hardener
Based on the information provided in the search results, the key points about Dezotop 900 are:
Dezotop 900 is a ready-to-use product composed of artificial mineral aggregates and cement, applied as a dry spray on fresh concrete surfaces. Dezotop 900 provides continuous protection against repeated use, impact, and abrasion, creating a durable surface resistant to industrial chemicals, oils, industrial grease, cleaning agents, and hydraulic fluids.
Primary uses:
Dezotop 900 is designed to optimize durability in areas with medium to heavy concrete floor traffic and where dust resistance is essential. Its primary applications include:
- Workshops
- Power plants
- Garages
- Parking lots
- Warehouses
- Loading areas
- Factories
- Shipbuilding workshops
- Aircraft hangars
- Multi-story parking lots
- Car washes
- Helicopter landing areas
Ingredients:
Dezotop 900 is composed of high-quality non-metallic artificial aggregates, proprietary chemicals, pigments, and cement. Its key advantages include:
- Pre-mixed quality assurance
- Seamless application on fresh concrete
- Quick and easy installation
- Better protection against leaks by applying more material at the end of the piece
- Higher resistance to abrasion, wear, and impact compared to regular concrete
- Non-oxidizing, non-slip final surface
- High impermeability compared to concrete under equivalent conditions
- Integration into the concrete structure without delaminating or separating
It does not oxidize.
The final surface is non-slip.
It has high impermeability compared to concrete under the same conditions.
Dezotop 900 becomes an integral part of the concrete structure and therefore does not peel or separate.
It does not collect dust.
It is suitable for both indoor and outdoor use.
It is easy to clean.
It is cost-effective.
It does not require any special preparation or application
Packaging:
Dezotop 900 is available in 25 kg bags.
Chemical Resistance:
When properly cured, Dezotop 900 resists machine oils, mineral oils, weak acids, 10% salt water solutions, and alkaline solutions up to 25%.
Abrasion Resistance:
According to ASTM C1353 testing, when Dezotop 900 is applied at a rate of 5 kg/m2, it exhibits approximately 240% greater abrasion resistance compared to a control concrete.
According to the information provided:
- Following ACI 302-1 R-89 and ACI 201-2R-77, the existence of a properly designed concrete mix is mandatory.
The concrete producer must ensure that the following requirements are met:
- Cement (SRC or OPC): Minimum 320 kg/m3
- Water-cement ratio: Maximum 0.5, Minimum 0.4
- Slump: Desired 75 mm
- Strength: Minimum 31 MPa
The concrete should not have segregation, bleeding, or more than 3% air content. When applying Dezotop 900 on concrete with microsilica, care must be taken regarding the application time. For better workability, the use of water-reducing admixtures like Dezoplase or Dezocrete in the concrete is recommended. The concrete layers on which Dezotop 900 is to be applied must have a minimum thickness of 75 mm. After concrete placement, the surface should be leveled using a screed and then vibrated.
The key steps for applying Dezotop 900 are:
1. Spread two-thirds of the required material evenly over the moist concrete surface using a long-handled tool.
2. Allow the applied material to absorb moisture from the surface, which will result in a uniform dark color.
3. Use a wooden trowel to spread the Dezotop 900 material across the surface, ensuring it integrates with the initial concrete surface.
4. Apply the remaining material, and once the color darkens, use the wooden trowel to spread it evenly across the surface.
5. When the surface has hardened enough to support the weight of a person with only a slight indentation, use a power trowel to complete the Dezotop 900 application, resulting in a smooth and non-slip surface. Avoid over-working the surface.
6. If final smoothing is done using hand tools like a metal trowel, this should be done before the concrete hardens to the point of being able to withstand foot traffic.
Storage:
Store this product in a covered area, away from direct sunlight, rain, and on pallets. Avoid excessive pressure. The product has a shelf life of approximately 12 months. Failure to adhere to proper storage methods can result in damage to the product or its packaging.
Safety Precautions:
This product contains cementitious materials that can cause irritation. Avoid contact with eyes and prolonged contact with the skin. In case of contamination, wash with water and inform a doctor. Keep out of reach of children.
Quality Assurance:
All products supplied by the Iranian Technical and Specialized Concrete Clinic comply with international quality standards.
DEZOTOP 900
Premixed dry shake surface floor hardener
Based on the information provided in the search results, the key points about Dezotop 900 are:
Dezotop 900 is a ready-to-use product composed of artificial mineral aggregates and cement, applied as a dry spray on fresh concrete surfaces. Dezotop 900 provides continuous protection against repeated use, impact, and abrasion, creating a durable surface resistant to industrial chemicals, oils, industrial grease, cleaning agents, and hydraulic fluids.
Primary uses:
Dezotop 900 is designed to optimize durability in areas with medium to heavy concrete floor traffic and where dust resistance is essential. Its primary applications include:
- Workshops
- Power plants
- Garages
- Parking lots
- Warehouses
- Loading areas
- Factories
- Shipbuilding workshops
- Aircraft hangars
- Multi-story parking lots
- Car washes
- Helicopter landing areas
Ingredients:
Dezotop 900 is composed of high-quality non-metallic artificial aggregates, proprietary chemicals, pigments, and cement. Its key advantages include:
- Pre-mixed quality assurance
- Seamless application on fresh concrete
- Quick and easy installation
- Better protection against leaks by applying more material at the end of the piece
- Higher resistance to abrasion, wear, and impact compared to regular concrete
- Non-oxidizing, non-slip final surface
- High impermeability compared to concrete under equivalent conditions
- Integration into the concrete structure without delaminating or separating
It does not oxidize.
The final surface is non-slip.
It has high impermeability compared to concrete under the same conditions.
Dezotop 900 becomes an integral part of the concrete structure and therefore does not peel or separate.
It does not collect dust.
It is suitable for both indoor and outdoor use.
It is easy to clean.
It is cost-effective.
It does not require any special preparation or application
Packaging:
Dezotop 900 is available in 25 kg bags.
Chemical Resistance:
When properly cured, Dezotop 900 resists machine oils, mineral oils, weak acids, 10% salt water solutions, and alkaline solutions up to 25%.
Abrasion Resistance:
According to ASTM C1353 testing, when Dezotop 900 is applied at a rate of 5 kg/m2, it exhibits approximately 240% greater abrasion resistance compared to a control concrete.
According to the information provided:
- Following ACI 302-1 R-89 and ACI 201-2R-77, the existence of a properly designed concrete mix is mandatory.
The concrete producer must ensure that the following requirements are met:
- Cement (SRC or OPC): Minimum 320 kg/m3
- Water-cement ratio: Maximum 0.5, Minimum 0.4
- Slump: Desired 75 mm
- Strength: Minimum 31 MPa
The concrete should not have segregation, bleeding, or more than 3% air content. When applying Dezotop 900 on concrete with microsilica, care must be taken regarding the application time. For better workability, the use of water-reducing admixtures like Dezoplase or Dezocrete in the concrete is recommended. The concrete layers on which Dezotop 900 is to be applied must have a minimum thickness of 75 mm. After concrete placement, the surface should be leveled using a screed and then vibrated.
The key steps for applying Dezotop 900 are:
1. Spread two-thirds of the required material evenly over the moist concrete surface using a long-handled tool.
2. Allow the applied material to absorb moisture from the surface, which will result in a uniform dark color.
3. Use a wooden trowel to spread the Dezotop 900 material across the surface, ensuring it integrates with the initial concrete surface.
4. Apply the remaining material, and once the color darkens, use the wooden trowel to spread it evenly across the surface.
5. When the surface has hardened enough to support the weight of a person with only a slight indentation, use a power trowel to complete the Dezotop 900 application, resulting in a smooth and non-slip surface. Avoid over-working the surface.
6. If final smoothing is done using hand tools like a metal trowel, this should be done before the concrete hardens to the point of being able to withstand foot traffic.
Storage:
Store this product in a covered area, away from direct sunlight, rain, and on pallets. Avoid excessive pressure. The product has a shelf life of approximately 12 months. Failure to adhere to proper storage methods can result in damage to the product or its packaging.
Safety Precautions:
This product contains cementitious materials that can cause irritation. Avoid contact with eyes and prolonged contact with the skin. In case of contamination, wash with water and inform a doctor. Keep out of reach of children.
Quality Assurance:
All products supplied by the Iranian Technical and Specialized Concrete Clinic comply with international quality standards.