Intermediate epoxy polyamide paint 1070-00
The key details about the Epoxy Polyamide 1070-00 mid-coat product are:
1. It is a two-component product made from a combination of epoxy resin and polyamide hardener, which forms a hard coating on metal surfaces after drying.
2. This coating dries through chemical reactions and has extensive applications as a protective coating on metal structures, marine docks, bridges, and industrial tanks, where high resistance to chemicals, mechanical factors, moisture, acids, and dilute alkalis is required.
3. With a high resin content, the coating has a glossy finish and is used to protect primer and intermediate layers in enclosed spaces.
4. Due to its antibacterial, anti-dust, and abrasion-resistant properties, this coating is widely used for coating hospital walls.
Technical Information:
- Color: White (other shades available)
- Mixing ratio (A/B): 100/20 by weight
- Thinner: Epoxy thinner
- Mixed density: 1.25 ± 0.1 g/cm³
- Weight solids of the mixture: 68 ± 2%
- Volume solids of the mixture: 52 ± 3%
- Coverage: 10 m²/L
- Drying time: Surface dry in less than 8 hours, through dry in less than 24 hours, final cure in 7 days
- Dry film thickness: 50 microns
Application Method:
Mix components A and B thoroughly for 5 minutes using a suitable mixer, then allow to stand for 1 hour before use.
Pot Life:
The mixed product is usable for up to 8 hours at 25°C.
Surface Conditions:
For better adhesion, use an epoxy primer and intermediate coat. The surface must be completely clean, dry, and free from oil, salts, dust, and other contaminants.
Storage Time:
One year under standard conditions.