BETOGARD SF-128
Elastomeric insulation, single-component sealing and protection, with a variety of colors
BETOGARD SF-128 protective insulation and sealing paint is made according to modern European technology based on emulsion resins and is soluble in water, which is completely resistant to moisture after drying.
Due to its solubility in water, it is non-flammable, completely hygienic and non-harmful to humans and the environment. Multicover insulating paint turns into an elastic layer after application, and due to its elasticity, it has high resistance to contraction and expansion and is resistant to temperature changes. 128-BETOGARD SF insulating paint penetrates into the cracks of concrete surfaces and waterproofs the concrete.
Function:
Isolation, waterproofing and painting of concrete and cement surfaces, protective coating in foundations and walls, sealing coating in toilets, exterior walls, roofs.
Indications:
Paint and insulation of cement and concrete facades (white insulation), waterproofing of roofs, parking lot floors, kitchens, toilets and bathrooms, protective coating on elastomeric insulations, sealing of asbestos roofs, sealing of brick walls.
Special properties:
• Ability to wash
• Anti moss and algae
• Excellent penetration and adhesion
• Resistant to heat and cold
• High resistance to structural drifts
• Resistant to moisture and acid rain
• Elastic property and flexibility
• Easy implementation, fast, uniform and simple repair
• Adequate, cost-effective and economical coverage level
• Resistant to water without solvents
• The possibility of presentation in various colors
• Single component and ease of implementation
Technical Specifications:
• Base: water
• Type of resin: emulsion acrylic
• Gloss: Matt
• Number of components: one component
• Density: 0.1 ± 2.2 g/cm³
•Surface drying time: at least 1 hour
• Complete drying time: at least 6 hours
• Obtaining resistance to water: at least 24 hours
• Coverage area per kilogram: 1 to 2 square meters depending on surface quality, porosity and place of use
BETOGARD SF-128 table of properties
|
Tensile strength
|
12 Mpa
|
|
bending strength
|
6 Mpa
|
|
Hardship
|
60 shore A
|
|
Hit resistance
|
4 Kj/m
|
|
Adhesion strength
|
14 Mpa
|
|
Temperature resistance
|
-20 to +120
|
|
Flammability
|
0%
|
|
Compressive strength
|
16 Mpa
|
|
UV resistance
|
100%
|
Procedure
Surface preparation:
1. The work should be free of moisture, dirt, grease.
2. Remove loose parts from the surface.
3. Repair deep cracks, seams and joints with special putty.
4. The corners, sides and corners should be tightened.
The implementation is done in two stages:
- The second layer (covering layer): After 6 hours of the implementation of the first layer (penetrating layer), multicover insulating paint should be applied thickly.
128-BETOGARD SF insulating paint can be used as a protective coating on 127-BETOGARD SF two-part waterproofing.
Explanation: To know the implementation method according to the different conditions of the projects, please contact the technical unit.
Safety tips:
Avoid contact with eyes and skin and wash your hands after use. In case of contact with eyes, skin or swallowing, consult a doctor immediately or refer to the safety section of the data sheet. Close the lid of the container when not in use and keep it out of the reach of children.
Maintenance:
The storage period is 12 months in the original packaging and in proper conditions. If you need more information, contact Iran's technical and specialized concrete clinic.