BETOPAINT 5710
Coating and color of the cement base of concrete and masonry structures
Description:
BETOPAINT 5710 is a two-component coating based on modified cementitious compounds and polymer, designed to be suitable for exposed facades in concrete structures.
Indications:
• Application of uniform color on exposed concrete surfaces and bridges
• Protection of concrete against moisture and carbonation
• Implementation of facade on external and external walls
Advantages and features:
• Excellent adhesion to the work surface
• The possibility of breathing into concrete
• The maximum similarity of color to concrete and the ability to modify
• The possibility of spraying
• High execution speed
• No need for water and the possibility of changing the color
• Resistance to rain and humidity
• Ability to wash
• Good mechanical resistance
Technical Specifications:
Number of components: two components (20 kg powder + 10 kg liquid)
• Color: gray (can be produced in different gray colors and shades)
Consumption amount: 1 kg per square meter (in case of high porosity, this amount can be increased.
• Specific weight: 1.8 kg
• Application method: spraying or using a brush
Method of Use:
Surface preparation: The surface must be free from all weak materials, dust, mold oil, paint, mud, etc. In general, the surface must be cleaned of any materials that prevent adhesion. Cracked and damaged concrete must be removed before applying the repaired coating, as well as weak concrete and mortar. The work surface must be smooth and without porosity. Pores and static cracks should be repaired and filled using mortar containing latex adhesive or Dezosive 1010 cement base repairer. The execution surface should be saturated with a dry surface by moistening. The seams of the molds should be leveled using sub-concrete.
Method of implementation: Pour the powder part of the product into a clean bucket or container and slowly add the liquid part of the product to it and mix at the same time by stirring on low speed. Continue mixing for 3 to 5 minutes until a uniform and homogeneous mixture without precipitation is obtained. After mixing, apply BETOPAINT 5710 on the surface with a trowel.
When performing with a brush, the layers should be applied perpendicular to each other. The second layer should be applied while the first layer is hardening and before it dries. The surface must be moistened before applying the second layer. You can use the prepared mixture for two hours.
Dosage:
1 to 1.5 kg of mixture per square meter.
Packaging, duration and storage conditions:
• 30 kg set (powder component A: 20 kg bag, liquid component B: 10 kg gallon)
• Store in a dry environment at a temperature of 5 to 35 degrees Celsius. Protect from high heat and frost.
Equipment cleaning:
Used equipment and supplies should be washed with water immediately after use. If the mortar dries on the cleaning equipment, it will be possible only by mechanical methods.
Warnings and limitations:
• Avoid contact with skin and eyes.
• It should not be used during frost and rain.
• Protect from direct sunlight, frost, rain, traffic and extreme humidity on external surfaces for up to 24 hours.
• Do not apply coating in air and surface temperatures below 5 degrees Celsius and above 45 degrees Celsius.
• When the surface is not damaged by traffic, you can apply tiles or mortar.
Safety tips:
Avoid contact with eyes and skin and wash your hands after use. In case of contact with eyes, skin or swallowing, consult a doctor immediately or refer to the safety section of the data sheet. Close the lid of the container when not in use and keep it out of the reach of children.
Quality:
All the products of Iran Technical and Specialized Concrete Clinic are in accordance with international standards and tested in the laboratory of this collection.
Maintenance:
The storage period is 12 months in the original packaging and in proper conditions. If you need more information, contact Iran's technical and specialized concrete clinic.