DEZOMIX 4900
Additive of microsilica gel with fast resistance properties
Improving the properties of concrete based on control over the concrete.
Explanation
It describes the application and benefits of using 4900 Dezomix in the production of high-strength concrete with characteristics such as high resistance, water tightness, low permeability, high durability, and special additives. It mentions that 4900 Dezomix is used to reduce plastic shrinkage cracks, enhance the relative tensile and flexural strengths of concrete, especially in concrete subjected to dynamic loads and impacts.
Applications:
1. Coastal areas in harmful sulfate, chlorine and salts
2. Water storage tanks
3. Concrete heads
4. High strength concretes
5. Hours in harmful dynamic loads, impact and fatigue
6. Concrete sections
7. Concrete walls are damaged by extreme cycles of melting and freezing
8. Military and defense concretes
Advantages:
• Easy application and high number of problems caused by use
Microsilica powder directly
• Reduction of shipping cost in comparison with Microsilis
• Increased compressive strength
• Reducing the ratio of water to cement
• Decreased permeability
• Obtain higher initial resistance
• Increased durability due to increased electrical resistance and as a result
Increased corrosion resistance
• Increased durability due to reduced permeability
Consumption :
Dezomix 4900
Workshop tests should be specified, therefore, as guidelines for our recommendations
It should be 5 to 10 percent, and the cement will be added to the concrete.
This value can be used during the construction of concrete or construction with baton Added
In case of adding 4900 Dezomix in Tarak Mixer, it should be added
It’s mixing in concrete ensured. The body means you should pass an Adding 4900 Dezomix takes between 3 and 5 minutes.
Out of bounds:
Less than 5% of 4900 Dezomix causes the absence of quality Good performance, rapid slump loss, reduction of lime absorption power The overall relative lowering of properties for concrete.
More than 10 percent and 4900 Dezomix cement Concrete is not recommended and it is only possible with the results of workshops Will be.
Appearance specifications:
State: in the state of gel stagnation and after shaking the liquid Gray
Specific weight: 1.35
Chloride level: no chlorine or much less than the standard limit
Nitrate: None
Freezing point: zero degrees Celsius
Flash point: None
Compatibility:
It should not be mixed with any other material
It is approved by the technical and concrete clinic company
Inventory:
4900 Dezomix should be in its original container and at a temperature of more than +5
To be kept in degrees Celsius. In case of ice, you can use it with
Heat slowly and stir until it is found again. Disregarding conditions
Proper storage may damage the product or its appearance
To be for more information on the appropriate storage method, contact the technical department
Contact technical and specialized concrete clinic.
Safety tips:
4900 Dezomix doesn’t contains dangerous substances.
For more information, refer to the product safety brochure.
Technical approval:
All the products made by Iran concrete technical and specialized clinic company
It is supplied in accordance with international quality standards.