Bitumen rubber sealant carried insolvent | DEZOFLEX   900

Bitumen rubber sealant carried insolvent | DEZOFLEX   900

RBS-contech

Bitumen rubber sealant carried insolvent |  DEZOFLEX   900


Applications

+ More


Bitumen rubber sealant carried insolvent |  DEZOFLEX   900

Bitumen rubber sealant carried insolvent | DEZOFLEX   900

Dezoflex 900 is an elastic sealant based on bitumen rubber, which is heated to fluidity and used for executive and expansion joints.

DEZOFLEX  900

Bitumen rubber sealant carried insolvent

According to ASTM-D-1190 standard

 

 

Description:

Dezoflex 900 is an elastic sealant based on bitumen rubber, which is heated to fluidity and used for executive and expansion joints.

 

Indications:

- Special for sealing drinking water tanks and water storage pools and dams

- As a flexible and durable sealant in the following expansion and execution joints, such as: concrete roads, the perimeter of parking lots and highways, streets, roofs, balconies, parking lots, multi-story parking lots, water supply channels, drinking water storage sources, and the joint between two buildings. On the roofs and water and sewage treatment plants.

 

 

Features and benefits:

- Resistant to sea water and sewage

- Resistant to weather conditions

- Very good adhesion to concrete, wood, ahem

- Non-flammable up to +80 degrees Celsius

- Maintaining flexibility at low temperatures

 

 

Instructions for use:

The boundary conditions of the seams should be as follows:

Minimum seam depth: 10 mm

For expansion joints:

Width to depth ratio: 1 to 5: 1 cm: 1 cm

For performance seams:

Width to depth ratio: 1 to 2.5: 1 cm

Surface preparation:

All surfaces must be clean, dry and free of any loose, sticky particles.

 

 

Surface preparation:

All surfaces must be clean, dry and free of any loose, sticky particles.

 

 

 

How to melt:

Using a double-walled pot or two barrels placed inside each other, pour thermal oil around the barrel and heat it to a temperature of 140 to 180 degrees Celsius until the mastic inside the barrel melts. The temperature should not exceed 190 degrees Celsius. (The temperature measurement can be controlled by a thermometer)

 

Attention:

- Do not put Dezoflex 900 in contact with Coltar.

- Maximum allowed temperature: 190 degrees Celsius

- Pouring temperature (degrees Celsius) +140 to +180

 

Technical Specifications:

- Physical state: solid

-Black color

- Specific weight: 1.1-1.7Kg/lit

- Type of mastic: modified bitumen

- Flow: (degrees Celsius): It does not flow up to 80 degrees Celsius

- Flexibility: 60% medium seam, very hot summer and mild winter

- Flexibility: 60% average seam, poor summer and cold winter

 

 

Safety tips:

 Avoid contact with skin and eyes. Dezoflex 900 does not contain any dangerous substances. For more information, refer to the product safety brochure.

 

 

Technical approval:

All products offered by Concrete Technical and Specialized Clinic are in accordance with international quality standards.

 

 



How It Works